| Win
This Ball |
 |
|
|
|
Bowling Ball Cleaners & Polishes |
|
Delays hook. Creates skid & distance. Produces a
mirrorlike finish.
CONTROL-IT can be used on both polished and dull equipment. CONTROL-IT creates
an additional 4 to 8ft in length and an even arc in the backend. To achieve
this we recommend the following procedure. On polished equipment, clean
and polish the ball first with RENEW-IT for about 45 seconds on each side.
After this is done, apply a liberal amount of CONTROL-IT on a terry cloth
towel. Apply on both sides for about 30 seconds or more. This will give
you about 4 to 5 feet in length. For additional length wait a couple of
hours and apply a second coat by hand. After applying several coats of CONTROL-IT,
oil will not penetrate the surface and the track will last several games.
For dull equipment, just apply CONTROL-IT by hand. This product does not
need a spinner to produce the above effect. CONTROL-IT can only be removed
by sanding only. |
|
|
|
)
