|
 |
| These replacement heels are for use
with Dexter SST 5, SST 6 & SST 7 bowling shoes only and can
be used on right or left handed
shoes. |
(Small) Women's 5-12
(Medium) Men's 6.5-9 (Tri-Dex only)
(Large) Men's 9.5-15 |
- H1 (PD747) Red Horseshoe - Most Brake (SM/LG) Included
w/ SST 6 & 7
- H2 (PD801) Ultra Brakz - More Brake (SM) Included w/
SST 7 & 8
- H2 (PD800) Ultra Brakz - More Brake (LG) Included w/
SST 7 & 8
- H2 (PD487) Ripple Rubber - Most Brake
- H2 (PD756) Reversible Ripple Rubber - More Brake Included
w/ SST 5 & 6
- H5 (PD489) Standard Brake
- H5 (PD802) Tri-Dex Standard Brake (SM) Included w/ SST
4 SE, 5, 6, 7 & 8
- H5 (PD803) Tri-Dex Standard Brake (MED) Included w/
SST 4 SE, 5, 6, 7 & 8
- H5 (PD804) Tri-Dex Standard Brake (LG) Included w/ SST
4 SE, 5, 6, 7 & 8
- H7 (PD490) Red Leather - Little Brake
|
| H1 (PD747) : Most Brake (Least
Slide) Red Horseshoe |
Bowler profile: For the power
player, the "cranker", who needs the most
brake.
The Red Horseshoe heel is the softest material which
brakes the strongest of all the heels offered by Dexter.
The beveled edge in the shape of a horseshoe and the
tapered design offer maximum dege contact with the approach
and a smooth transition from the slide sole to the braking
heel. The Horseshoe heels are made of proprietary rubber
compositions available exclusively to Dexter. Recommended
for slippery/icy conditions.
Included with SST 6 & 7 |
| H2 (PD487) : Most Brake (Less
Slide) |
Bowler profile: For the powerful
"cranker" who needs less slide.
The rippled rubber heel brakes the strongest of all
heels offered by Dexter. This heel is 1/8" higher
than all other heels. The additional height provides
more braking power. Recommended for slicker conditions.
|
| H2 (PD756) : More Brake (Less
Slide) Reversible |
Bowler profile: For the power
player "cranker" who needs a quick brake
The adjustable Braking Reversible Ripple heel is a high
friction material similar to the original Ripply h2
but can be reversed to place the ripples in the forward
direction to increase braking power. It's lower profile
also suits some bowlers who feel that the original ripple
is too thick.
Included with SST 5 & 6. |
| H5 (PD489) : Brake (Standard) |
Bowler profile: For any player
who needs average brake.
This rubber heel is made of a special Dexter rubber
blend which has slip coefficient added to the rubber
and a smooth finish for even braking control. This rubber
heel is standard equipment on the SST 1+4 because of
it universal effectiveness on a majority of approaches.
Recommended for normal approach conditions.
Fixed on SST 1 (men's). |
| H7 (PD490) : Little Brake
(Most Slide) |
Bowler profile: For the "stroker"
who wants the least amount of brake.
The Red Heel is made with a leather slide surface, including
a rubber base and bevel. Recommanded for sticky approach
conditions.
Included with SST 6, 7 & 8. |
|
|
)
